产品资料

单头磨平机磨片机

如果您对该产品感兴趣的话,可以
产品名称: 单头磨平机磨片机
产品型号: XY-6072D
产品展商: 轩宇
产品文档: 无相关文档

简单介绍

单头磨平机磨片机 本机在将橡胶或塑胶哑铃状试片磨平、磨薄或磨出所需之厚度，以供拉力、老化、耐油等试验之用。试片台左右、上下及后之移动，以扳手操作。


单头磨平机磨片机  的详细介绍

单头磨平机磨片机  

规格试料磨平机

本机在将橡胶或塑胶哑铃状试片磨平、磨薄或磨出所需之厚度，以供拉力、老化、耐油等试验之用。试片台左右、上下及后之移动，以扳手操作。

符合UL1581标准第420.6条规定。

主要技术参数
砂 轮：36#；  ø 6″
砂轮线速度：3000～5000feet/min或15～25m/s
皮带轮加速比：2：1
体 积：50×60×40cm
重 量：50kg
电 源：1∮，AC220V 50Hz

 单头磨平机磨片机  
420.6 A power-driven buffing machine （grinding wheel） is appropriate for buffing irregularities from the samples from which die-cut specimens are to be prepared. The abrasive wheel is to be of about No. 36 grit （particle size of 0.019 inch or 0.486 mm）. The wheel is to run true ａnd is not to vibrate. The diameter of the wheel is not specified; however, 4-3/4 – 6-1/4 inch or 0.12 – 0.16 m has been found appropriate. The rotary velocity of the wheel is to be 2500 – 3500 r/min. The diameter ａnd rotary velocity of the wheel are to be selected to give the wheel a peripheral speed （rpm×p×wheel diameter） of 3000 – 5000 ft/min or 15 – 25 m/s. CAUTION – The maximum wheel diameter stated in this paragraph ａnd the maximum wheel rpm stated in this paragraph shall not be used together as this combination will result in a peripheral speed above 5000 ft/min or 25 m/s. This applies even for wheels that are marked as being intended for a peripheral speed above 5000 ft/min or 25 m/s. The machine is to have a slow feed that applies light pressure ａnd removes very little material at one cut, thereby not overheating the specimen or the wheel.

哑铃制样机  橡胶裁刀  双头磨片机  阿克隆磨耗机  刨片机  简支梁冲击试验机


产品留言
标题
联系人
联系电话
内容
验证码
点击换一张
注：1.可以使用快捷键Alt+S或Ctrl+Enter发送信息!
2.如有必要,请您留下您的详细联系方式!